System will not turn on:
Check power plug and breakers.
Low water level alarm:
Add more water – the water level can be dropped during operation by the pump due to water turbulence.
Low water level alarm turns on after a few seconds of operation
：
Add more water – The pump generates “waves” – sometimes these waves will cause the water level at the sensors to fluctuate up and down. The waves
sometimes drop the water level right under the sensor and will cause a low water alarm. This is normal and you just need to add more water.
Temperature read does not match thermometer
：
Sous Vide circulators are calibrated to a scientific platinum primary standard which is far more accurate than store thermometers.
Lights in house are slightly flickering when system is on
：
This is normal as the circulator is modulating power.
Error code EE1 will be appeared in below situation with alarm sound:
1. No water in tank
Water below minmum level
Appliance in situation of short cuicuit