76
Data Communication
SH-06E_E_09.fm
[76/76]
You can make a Bluetooth Smart device respond to the
handset operations or notify you of incoming calls or new
mails by operating the handset if you connect the handset to
the Bluetooth Smart device.
If you have connected the handset to a Bluetooth Smart device, you
can make the Bluetooth Smart device ring or vibrate by operating
the handset.
1
In the Bluetooth screen, [
B
] of a connected
Bluetooth Smart device
/
[Notify this device]
2
Select a notification method
You can make settings for operations available when the handset is
connected to a Bluetooth Smart device.
1
In the Bluetooth screen, [
B
] of a connected
Bluetooth Smart device
/
[Advanced settings]
2
Select an item
Incoming call notification
: Set whether to notify you through
the Bluetooth Smart device when receiving a call.
Mail reception notification
: Set whether to notify you through
the Bluetooth Smart device when receiving a mail.
Alarm notification
: Set whether to notify you through the
Bluetooth Smart device when an alarm rings.
Schedule notification
: Set whether to notify you of schedule
notifications from the calendar through the Bluetooth Smart
device.
Time change notification
: Set whether to synchronize clocks
between the Bluetooth Smart device and the handset.
Link loss notification
: Set how to notify you when the
Bluetooth connection is temporarily disabled.
NFC stands for Near Field Communication and is a near field
wireless communication system which conforms to the
international standards set by ISO (International Organization
for Standardization). You can use the contactless IC card
function, reader/writer function (R/W), Peer to Peer function
(P2P), etc. on the handset.
You can send and receive data to and from handsets which
support Reader/Writer, P2P function.
Enable [Reader/Writer, P2P] and set Android beam to [ON] in
advance (
n
P. 45).
Android beam is not available when NFC/Osaifu-Keitai lock is
set.
Android beam may not be available depending on the app.
Communication with all handsets which support Reader/Writer,
P2P function is not completely guaranteed.
The precautions about using Android beam are the same as
those about iC communication (
n
P. 73).
Other precautions are the same with the precautions for when
you hold the handset over the other device (
n
P. 45).
Example: Phonebook
1
In the home screen, [
R
]
/
[docomo
phonebook]
/
[Contacts]
/
select a name
2
Place the
a
mark over that of the other party’s
handset
:
[Touch to beam] appears.
:
If “License Agreement” is displayed, check the content,
follow the instructions on the screen and operate.
3
Touch the screen
1
Place the
a
mark over that of the other party’s
handset
Note that if you select [Delete all before registration] when
receiving all data, all data registered to the target function are
deleted.
Some data cannot be received all.
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
Bluetooth Smart device connection
Notifying this device
This is available only on Bluetooth Smart devices supporting
FMP (Find Me Profile).
Advanced settings
NFC communication
Android beam
Sending data
Receiving data
SH-06E_E.book 76 ページ ２０１３年６月３日 月曜日 午後３時５１分