16
AT-MGS-408 User Manual
how the controller has been wired.
Main Menu
CONTRLR CONFIG
press
OK
,
to access the setup parameters menu.
Figure 4-6 -
Setup Controller Configuration
4.2.2 Relay Setup
To access the Relay setup menu:
Main Menu
CONTRLR CONFIG
RELAYS
press
OK
.
From this menu, each of the three relays can be configured for either normal or
failsafe operation. The default is normal, meaning normally open contacts will close
with the event corresponding the relay designation. If fail safe is selected, the relay
will be normally energized and will be de-energized with the relays designated event
or a power failure.
To select the type of alarm for each relay:
Main Menu
CONTRLR CONFIG
RELAYS
press
OK
to access the Relay setup
menu.
Press the
Up/Down arrows
to select relay, and press
OK
.
(The configuration type for the selected relay will begin to flash.)
Press the
Right/Left arrow
to change the configuration type, press
OK
.
Figure 4-7 -
Relay Setup Menu
Figure 4-8 -
Toggling the Alarm Setting
