3
4
6
7
3
5
4
6
8
8
8
4
Brushed Aluminium Effect
1
2
Figure 9. AT-G-ALERT Components
1.
Example of a custom faceplate
2. Example of a UK back box
3.
Mounting tabs
4. Direction arrows (x2) for proper
mounting.
5. Sensor type / calibration and ID/
serial number labels
6. Test point access holes (x2)
7. Replaceable sensor module
8. Sensor alignment ribs (x3)
Note:
For UK back boxes with
“higher” mounting tabs, remove
the thick plastic mounting tabs from the
detector (using wire snips or nippers) and
screw on the thinner metal mounting tabs
(included) to ensure flush wall mounting
of the faceplate. Be sure to dry fit the
plastic tabs before cutting them from
the detector to verify that they are too
thick for proper flush mounting of the
faceplate to the wall.
Figure 10. AT-G-ALERT Retrofit of Thinner Metal Mounting Tabs
OPERATION OVERVIEW
