Instructions
Under Rim LED Accent Light
(base light)
WATER RESISTANT - DO NOT FULLY SUBMERGE
1. Attach mounting clip to the Under Rim LED Accent Light.
2. Attach the mounting clip to the inside lip of the aquarium frame at the
back of the aquarium.Rotate the lamp so LEDs are aiming downward
towards the center of the aquarium.
3. Route the light power cord out the back of the aquarium and connect the
transformer to the cord.
4. Plug the transformer into an acceptable outlet. Be sure to incorporate a
“drip loop” as instructed in the safety information.
5. Turn on using on/off switch.
Under Rim LED Add-On Lamp
Add up to two Add-On Lamps to a base light
WATER RESISTANT - DO NOT FULLY SUBMERGE
1. Turn off and unplug the Under Rim LED Accent Light.
2. Disconnect the LED light power cord from the transformer and plug the
3-way splitter into the transformer.
3. Attach a mounting clip to the Under Rim LED Add-On Lamp.
4. Attached mounting clip(s) to the inside lip at the back of the aquarium;
rotate each light so each lamp is aiming downwards towards the center of
the aquarium
5. Route the power cord for each light out the back of the aquarium and
connect each cord to the connector of the 3-way splitter.
6. Plug the transformer into an acceptable outlet. Be sure to incorporate a
“drip loop” as described in the safety instructions.
7. Turn on using on/off switch
Aquarium
Length
Recommended
Number of Lights
10 Gallon
20"
1
20 Gallon
24"
1 or 2
29 Gallon
30"
1 or 2
30 Gallon, 40 BR
36"
2 or 3
55, 75, 90 Gallon
48"
3
Parts Diagram
Under Rim LED
Accent Light
3-Way
Splitter
Transformer
Mounting Clip
(included with Under Rim
LED Accent Light and Under
Rim LED Add-On Lamp)
Mounting Clip
On/Off
Switch
