• Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" - 3" from the bottom.
• Place plants and décor items into
aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Place filter holder on back of aquarium so that
clips on back and sides hold firmly in place.
• Place filter in filter holder with filter clip so that
filter is held firmly in place.
• Place rinsed filter cartridge into filter making
sure that the word “front” on filter cartridge
tab is facing up to secure in place.
• Position filter power cable to run down back
wall of aquarium.
• Plug USB connector from light cable into
USB bar on bottom back of aquarium.
• Add cover, positioning the feeding hole
towards front of aquarium.
• Insert MP3 device into cradle if applicable.
6.
add
Cover
and
MP3 Device
5.
add
Filter
Use rocker switch to operate light
RED
- USB from speaker
to USB bar
BLUE
- hardwired USB cable
from speaker to speaker
PURPLE
- from filter to wall
socket
GREEN
- USB from LED light
to USB bar
ORANGE
- USB from MP3
device charger to USB bar
YELLOW
- 3.5 mm audio from
MP3 device to speaker
• Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" - 3" from the bottom.
• Place plants and décor items into
aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Place filter holder on back of aquarium so that
clips on back and sides hold firmly in place.
• Place filter in filter holder with filter clip so that
filter is held firmly in place.
• Place rinsed filter cartridge into filter making
sure that the word “front” on filter cartridge
tab is facing up to secure in place.
• Position filter power cable to run down back
wall of aquarium.
• Plug USB connector from light cable into
USB bar on bottom back of aquarium.
• Add cover, positioning the feeding hole
towards front of aquarium.
• Insert MP3 device into cradle if applicable.
6.
add
Cover
and
MP3 Device
5.
add
Filter
Use rocker switch to operate light
RED
- USB from speaker
to USB bar
BLUE
- hardwired USB cable
from speaker to speaker
PURPLE
- from filter to wall
socket
GREEN
- USB from LED light
to USB bar
ORANGE
- USB from MP3
device charger to USB bar
YELLOW
- 3.5 mm audio from
MP3 device to speaker
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 80 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" - 3" from the bottom.
Add Water Conditioner as directed
• Pour room-temperature water into
aquarium over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner.
• Place filter holder on back of aquarium so that
clips on back and sides hold firmly in place.
• Place filter in filter holder with filter clip so that
filter is held firmly in place.
• Place rinsed filter cartridge into filter making
sure that the word “front” on filter cartridge
tab is facing up to secure in place.
5.
add
Filter
RED
- USB from speaker
to USB bar
BLUE
- hardwired USB cable
from speaker to speaker
PURPLE
- from filter to wall
socket
GREEN
- USB from LED light
to USB bar
ORANGE
- USB from MP3
device charger to USB bar
YELLOW
- 3.5 mm audio from
MP3 device to speaker
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 80 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" - 3" from the bottom.
Add Water Conditioner as directed
• Pour room-temperature water into
aquarium over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner.
• Place filter holder on back of aquarium so that
clips on back and sides hold firmly in place.
• Place filter in filter holder with filter clip so that
filter is held firmly in place.
• Place rinsed filter cartridge into filter making
sure that the word “front” on filter cartridge
tab is facing up to secure in place.
5.
add
Filter
RED
- USB from speaker
to USB bar
BLUE
- hardwired USB cable
from speaker to speaker
PURPLE
- from filter to wall
socket
GREEN
- USB from LED light
to USB bar
ORANGE
- USB from MP3
device charger to USB bar
YELLOW
- 3.5 mm audio from
MP3 device to speaker
