22 - Dispensing anolyte and catholyte (strong alkaline water)
•
When using the left water spout, unfiltered tap water is enriched with the
saline solution from the salt water tank. Then it flows directly to the 9
electrode electrolysis cell on the left. This is called an “electrochemical”
water activation.
•
Important:
Ensure the room is well ventilated when using this function. It
can lead to, for example, a harmful chlorine gas leak. The amounts are
minimal, yet in the worst of cases it can lead to health problems.
•
Before using this function you have to fill the tank for the saline solution in
the following way.
Not drinking water! Only
use under therapeutic
supervision
Open the front flap of the device, remove the tank and fill it with 440 ml of
de-ionized or distilled water. Add the 20 g of pure salt delivered with the
device. After the salt has dissolved, place the tank back into its position.
Saline solution preparation (electrolysis booster)
Turn the water switch ON when in Stand-by
mode
Switching ON when in the function water mode
Summary of Contents for Water Tractor
Page 40: ......
