Please carefully read all of the information in this manual. Familiarity with operation and installation proce-
dures will help you obtain the best possible performance from your new Marine Radio Controller.
Introduction
3
1. Speed-Up Button: Press to alert driver to speed
up. Driver’s speed-up indicator will flash twice.
2. Slow-Down Button: Press to alert driver to slow
down. Driver’s slow-down indicator will flash
twice.
3. Source Button (SRC): Press to change the
source/mode: Radio, CD and Auxiliary Input.
Depending on what other input sources are con-
nected (IPOD, Sirius, USB or CD Changer) these
sources will also be available for selection.
4. Tune/Track Buttons:
Radio: Press either button and the tuner will
scan to the next strong station and stop.
Note: Depending on the radio, the tuner may
only move to the next frequency digit
instead of scanning to the next strong
stations. Refer to the radio’s manual for
more information.
CD Mode: Press to change to a lower or higher track.
5. Volume Control: Press the VOL+ button to increase the volume level and press the VOL- button to
decrease the volume level.
6. Power On/Off Button: Press to turn the unit on or off.
7. Mute Button: Press to mute the volume level. Press again to restore.
Safety Information
DO NOT OPEN COVERS AND DO NOT REPAIR BY
YOURSELF. PLEASE REFER SERVICING TO A
QUALIFIED TECHNICIAN.
CHANGES OR MODIFICATIONS TO THIS PRODUCT
NOT APPROVED BY THE MANUFACTURER WILL VOID
THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
Power On/Off:
Press the
button to turn the unit on or off.
General Operations
3
1
7
6
5
4
2
Button Locations and Functions
MRC-2U-UM 3/28/11 8:47 AM Page 3