IsACQ210TL-2 Rev. 240907-2
4 - 8
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
English
Suggestions for an accurate level reading
Precise readings greatly depend on periodic cleaning of the sensor.
Below is a list of some simple suggestions for optimum level readings in aquariums:
- Periodically wash the probe with tap water.
- Do not install the interface in contact with wet or damp parts.
- Do not install the level sensor near reciprocating pumps.
IMPORTANT
Aquatronica guarantees reliable level control only if its line of sensors are used.
The use of other brands of sensors could cause system anomalies.
NOTE: in case of malfunctions or any doubts about the use of this interface, please
contact AQUATRONICA’S free Technical Assistance.
Suggestions for an accurate reading of the temperature
Below is a list of some simple suggestions for optimum temperature readings in aquari
-
ums:
- The temperature sensor must not be installed near heaters or coolers.
- Install the sensor where it cannot accidentally come out of the water.
- At installation, calibrate using a sample temperature sensor.
NOTE: in case of malfunctions or any doubts about the use of this interface, please
contact AQUATRONICA’S free Technical Assistance.
Information on programming and calibration
FOR ALL INFORMATION REGARDING THE PROGRAMMING AND CA
-
LIBRATION OF THE TEMPERATURE AND LEVEL SENSORS, PLEASE
REFER TO THE AQUARIUM CONTROLLER INSTRUCTION MANUAL.
THE LATEST VERSION OF THE MANUAL IS AVAILABLE ON THE WEB
-
SITE
“http\\www.aquatronica.com”
IN THE “DOWNLOAD” AREA.
