1½” ABS DWV Hub
x FIPT Female Adapter*
INSTALLATION SEQUENCE continued
•
Picture 4:
the water outlet pipe should be connected.
•
Picture 5:
foot leveling lock nuts are adjusted.
•
Picture 6:
silicone is applied to the feet of the bathtub that stands on the floor.
•
Picture 7:
when the installation is completed, the bathtub is taken down from the supports ( ie 2 x 4x4's).
If necessary, installation is completed by applying silicone at several points between the bottom panel and floor.
Compatible adaptors for adapting a threaded male connection to a solvent weld connection:
•
Mueller Industries: Part # 05913
Or
•
Nibco: C4803
http://www.homedepot.com/p/NIBCO-1-1-2-in-PVC-DWV-Hub-x-FIPT-Female-Adapter-C4803HD112/100677994
The adaptor must have the appropriate thread type or it will keep slipping and you will not be able to
get a tight connection!
Olivia
™
Corner acrylic bathtub
4
5
7
6
