Cleaning &
Maintenance
AquateX™
Batht
ubs
WARNINGS
Detergents that contain alcohol, strong acids and acetones must not be used to treat the AquateX™
surfaces.
If one of the above-mentioned substances come into contact with the material, we recommend
cleaning the surface immediately with plenty of water and detergent to avoid the formation of perma-
nent stains.
Ensure not to use colored detergents which could leave pigment residues.
Avoid contact between the material and products with high coloring power such as nail varnish, hair
dyes, self-tanning products, etc., and oil-based products (hair oil and conditioner), because they
could cause permanent stains.
Do not use cloths or pads containing metal wire.
Recommended products:
Soft cotton cloths of a “natural multi-purpose” type.
•
Microfiber cloths (depicted overleaf) or similar.
•
“Scotch-Brite©” (depicted overleaf) – solely for treating tough, persistent stains.
•
Ammonia-based detergents (e.g. LYSOFORM).
•
Slightly abrasive cream-based detergents (e.g. CIF, Mr. Clean, Fantastik, Soft Scrub® Multi Sur-
face Gel etc.).
•
Descaling agents (e.g. VIAKAL)
•
Bleach
Daily cleaning
AquateX™ bathtubs are easy to clean and maintain.
It is sufficient to clean AquateX™ bathtubs with dishwashing soap, water and a soft non-abrasive
sponge or microfiber cloth. Other common household detergents can also be used to remove most
of the dirt and stains that might accumulate on the surface. Abrasive sponges like “Scotch-Brite©”
depicted at right) should be used to treat persistent stains that cannot be removed with a soft mi-
crofiber cloth.
The above simple steps will ensure that the original matte finish, distinguished feature of AquateX™,
will retain in its original condition with it’s pleasant to touch velvety-smooth texture.
Aquaticausa.com
Aquaticabath.ca
E: [email protected]
