Aquatic Industries, Inc.
21
OPERATION of
MILLENNIUM SERIES
UNIVERSAL REMOTE CONTROL:
DELETING A LEARNED FUNCTION (continued):
Limitations:
1. There are certain device codes which are not learnable (or others that once they are learned can create a bad
functionality).
2. The unit can learn only one code per key.
3. All keys with the exception of
shift
,
setup
and the mode keys (
tv
,
video
,
aux
,
bath
) can be learned on.
4. During a learning event, the source remote and target should be no more than 1 to 2 inches apart.
5. The learning process should be conducted in an area where there is a low level of IR emission. High levels of natural
light or energy efficient fluorescent lights could interfere with a learning event.
6. In general, it is not recommended to learn a function to
Record
key because it requires a double key press to send
the record function in normal operation.
7. Typically, there are up to 24 keys that can be learned.
DELETING FUNCTIONS AND CODES:
If your memory is full, you will need to delete one or more functions on your Universal Remote. Here is how to delete
all functions and codes:
Deleting all learned functions
:
1. Press and hold
setup
until LED blinks twice, then release key.
2. Enter
9
-
8
-
0
. LED will blink twice. Remember to press and hold
shift
key first to access numbers (
0
-
9
).
Note:
•
All learned functions are deleted and remote reverts to original functions.
•
The LED blinks two times, pause then blinks 2 more times after successful completion of the
programming sequence.
Deleting all learned functions and codes
:
1. Press and hold
setup
until LED blinks twice, then release key.
2. Enter
9
-
8
-
1
. LED will blink twice. Remember to press and hold
shift
key first to access numbers (
0
-
9
).
Note:
•
The remote resets all learned functions and codes.
•
The LED blinks two times, pause then blinks 2 more times after successful completion of the
programming sequence.
