Aquatic 9
Infinity Owner's Manual & Installation Guide
FAST FILL WATERFALL SPOUT
Your Fast Fill Waterfall Spout will be stubbed as in Diagram 3B.
See Diagram 3C for connecting the hot and cold valves.
MODEL
A
B
(From center of overflow pipe
(From center of
to outside rim)
drain to tub rim)
PLEASE NOTE: THE MANUFACTURER ACCEPTS A 1/4” VARIANCE. THERE ARE VARIATIONS
ON EACH TUB AND SPECIFICATIONS ARE SUBJECT TO CHANGE AS WE IMPROVE UPON
OUR PRODUCT AS REQUIRED.
THE DIMENSIONS NEEDED FOR SITE PREPARATION AND STRUCTURE BUILDING WILL
DIFFER; AQUATIC ASSUMES NO RESPONSIBILITY FOR PREPARATORY WORK.
ROUGH-IN MEASUREMENTS
INSTALLATION INSTRUCTIONS
3A
See Diagram 3A, below
3B
Fast Fill Waterfall Spout is stubbed out with a
3/4” female threaded Brass fitting.
FROM VALVES
3C
Infinity 2
2 3/8”
9 1/2”
Infinity 4
3”
11 3/4”
Infinity 5
3 1/2”
11”
Infinity 6
5”
10 1/2”
Infinity 7
4”
10”
Infinity 9
2 1/2”
8 3/4”
CAUTION:
Do not overtighten. Do not use Teflon Tape.
B
A
