background image

Technical Products

Technical Products

ELECTRIC CHILLER

Instructions / 

Warranty

AquaChill 200

Features:

1.  Thermo-electric Chiller

2.  For Fresh- and Marine water aquariums

3.  Micro-processor conducted

4.  Silent - Easy to install

5.  Temperature reach 15°C - 30°C

6.  Reduces water temperature 3°C - 4°C in a 

     200L. aquarium

Parts List

AquaChill 200

Power source

1. Water inlet

2. Water outlet

3. Function display indicator (LED)

4. Temperature indicator

5. Temperature adjuster (higher)

6. Temperature adjuster (lower)

7. Ventilation inlet

8. Ventilation outlet

9. 24V electric connecting wire set

10. Radiator fan

11. Power source switch

12. Socket

13. Power source 115V/230V

      selector switch

14. Radiator grid

15. 24V socket

Read the instructions carefully before use.

1. Do not disassemble nor modify the AquaChill 200 in order  

    to avoid electrical shock or fire hazard. If opened warranty expires.   

2. Do not use other electric wires or plugs than the ones supplied with

    the AquaChill 200.    
3. To prevent electric shock, do NOT touch the power source with wet   

    or sweaty hands, or when the power source itself is wet.

Safety precautions

4. A pump with a water debit of 1000 to 2000 liters per hour is 

    recommended.

www.aquatic-nature.com

www.aquatic-nature.com

Summary of Contents for aquachill 200








Reviews: