Aquathin PEARL 30, Getting Started

Page: 49 / 60

49 © 2009-2016 Aquathin Corporation. All rights reserved.
C2. Anatomy of John Guest Speedfit ® Fitting
Tubing End-stop
Collet
Internal O-Ring
1)Insert tubing into fitting,
2)Past the Internal O-Ring,
3)Until it bottoms out
against the tubing end-stop
Pull on tubing to ensure a
secure connection, then
slide red Lock Clip be-
tween collet and fitting.
Remove the red Lock-Clip
Push Collet up against body of the
fitting, which will release the internal
teeth.
While compressing Collet,
pull out the tubing.