INITIAL START-UP
(continued)
Before turning on the spa, you must…
- Fill the spa completely
- Open the water access valves located in the technical housing
You must also...
- Remove the strainer cover on the front of the pump taking care not to lose
or move the seal on the underside of the clear cover
- Fill the strainer receptacle with water
- Close the strainer cover
- Turn on the spa (circuit breaker in "ON" position)
If the system does not appear to start properly, air may be trapped in the plumbing
and/or motor system; you will probably see the
FLO
indication on the electronic keypad.
To correct this situation, you must slightly unscrew the purge cap on the black cover
on the top of the filter to let the air out and screw it back when water comes out. You may
have to repeat this process a few times.
32
FLO