Aquatec PondMAX PX20000 Instruction Manual Download Page 2

W A T E R G A R D E N I N G   T O   T H E   M A X

A Q U A T E C E Q U I P M E N T. C O M

WELCOME TO THE WORLD OF 

PONDMAX™

YOU MADE THE RIGHT CHOICE INVESTING IN THIS 
QUALITY PRODUCT. 

THANK YOU AND ENJOY.

TECHNICAL SPECIFICATIONS

DESIGN HIGHLIGHTS

The PondMAX High flow Filter Pumps have been manufactured with advanced technology to provide you with the 
best quality pumps for your pond or water feature. Visit our website to view our range of pond filtration, outdoor/ 
underwater lighting, water treatments and general accessories.

•  Variable Frequency Motor Technology - 

Extra high 

speed rotations of impellor.

•  Open Vane Impellor - 

Handles large particles size up to 

6mm soft sediment.

•  Long life Impellor - 

Ceramic shaft is wear resistant and 

self-lubricated by water

•  Energy Efficient - 

Exceptional low power consumption 

to high water flow conversion.

•  Eco Friendly - 

Exceptional low dB noise rating with low 

mechanical vibration.

•  Compatibility - 

Suitable for fresh and salt water use, 

both submersible and in-line use.

DESCRIPTION

PX20000

PX30000

MAX WATER FLOW  (L/H)

20000

30000

MAX HEAD (M)

7M

5M

POWER CONSUMPTION (W)*

200W

400W

VOLTS

240

240

IP RATING

IPX8

IPX8

FREQUENCY (HZ) AC

50

50

CABLE LENGTH

10M

10M

OUTLET BSP THREAD (INCH)

2

2

RECOMMENDED TUBE SIZE (MM)

50

50

PRODUCT ORDER CODE

02PX209

02PX309

* SUBJECT TO VARIATION ACCORDING TO LOAD.

PMAX PX20000_30000 Pumpss Instructions.indd   2

28/8/19   10:25 am

Summary of Contents for PondMAX PX20000









Reviews: