6
ONE-YEAR LIMITED WARRANTY
The manufacturer warrants this product to be free from defects in material and workmanship for one year from date or
purchase.
Proof of purchase (original sales receipt) from the original purchaser must be made available to the manufacturer for all
warranty claims. This warranty is non-transferable. It does not apply in the event of installation error, abuse, misuse or
improper care and maintenance (whether by a contractor, service company or member of the purchaser’s household).
This warranty does not apply to any products that have been moved or removed from their original installation site. This
warranty excluded all industrial, commercial and business usage. This warranty does not cover labor charges incurred
and/or damage sustained in installation, repair or replacement, nor incidental or consequential damages.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-417-7564, 8 a.m. - 8 p.m., EST, Monday - Friday.
801-1
801-2
801-3
801-4
801-5
801-6
801-7
801-8
801-9
Printed in China
6
Floor hardware
801-6
7
Tank assembly hardware
801-7
8
Bevel disc & bowl bolt caps
801-8
9
Toilet seat assembly set
801-9
1 Flush
valve
801-1
2 Fill
valve 801-2
3 Flush
button
801-3
4 Wax
ring 801-4
5
Tank-to-bowl seal
801-5
TROUBLESHOOTING
Part
Description
Part
#
Problem
Possible
Cause Corrective
Action
Poor flush
1. Shut-off valve is not fully open.
1. Open the valve.
2. Water pressure is low.
2. Increase the pressure.
3. Push rod is too short.
3. Adjust push rod to desired length.
4. There is dirt in pipe.
4. Clean the dirt from pipe.
5. Filter element is blocked.
5. Clean the filter element.
6. Water seal hole is blocked.
6. Dredge water seal hole.
Toilet leaking
1. The button poles are too long.
1. Adjust the length of button poles.
2. The rubber seal of outlet is broken.
2. Change the rubber seal.
3. Water supply is stopped.
3. Change or adjust the inlet fitting.
4. Rubber seal between tank and bowl is
4. Change the rubber seal.
broken.
5. The float level is higher than overflow.
5. Adjust the water level to the mark position.
6. The fitting is wedged.
6. Check for the wedged fitting.
Excessive noise
1. Valve is blocked.
2. Remove dirt or obstruction from the valve
when tank is filling
head. Flush the lines.
Part
Description
Part
#
Excessive noise
when tank is filling