6
Lowes.com
ASSEMBLY INSTRUCTIONS
5.
Install the tub spout (J):
a. Wrap thread sealant tape around the pipe thread of
the tub spout outlet.
b. Thread the tub spout (J) into the threaded
connection and twist clockwise until the spout
becomes
with the
wall.
5
J
6.
Remove the plastic cap from the valve body (G) by
twisting the cap in a clockwise direction.
6
G
L
7.
Check for leaks:
a. Place the handle (I) on the end of the inverter (L)
and turn the handle to the on position.
b. Turn on the hot and cold water supply lines and
allow the water to
from the outlets until all
foreign matter has been
out of the line. Run
hot and then cold for one minute each.
c. Check for leaks.
d. Shut off the water at the faucet and supply lines.
7
I
L
