3
I. Brief introduction to the product.
AquaSound does not assume any liability beyond the application or use of any products, or software
described herein. AquaSound further reserves the right to make changes in any products described
herein without notice. This publication is subject to change without notice.
Trademarks
The Wireless Display is integrated with a transmitter and receiver to realize connection of different
A/V sources to the LCD Display using 802.11a/b/g wireless technology. It can be used such to
connect (view) cable and Broadcast TV, DVD players, VCRs, PVRs and cameras for remote
viewing.
The monitor must be within approximately 100 feet (30 meters) of the base station to send and
receive transmissions clearly.
At home, it is best to set up the base station in a central location, allowing more even distribution of
the wireless signal to all parts of the house.
The transmitter compresses audio and video signals into MPEG2 streaming format and the
receiver (built into the monitor), decodes the data and then transports these signal to the Display.
There are two A/V (DVD) inputs, one S-Video (CCD camera or other S-Video output device)
input and one RF (TV or other) TV tuner input. The Wireless Display uses a 17” LCD TV
panel. The key features of the panel include a 16:10 wide screen aspect ratio, 1440 x 900
high resolution. The product has passed IPX6 waterproof grade.
Power Management
1
Do not operate the monitor or transmitter box with any unspecified power supply. Use of incorrect
voltage will cause malfunction and may cause fire or electric shock.
2
Within warranty period, if switching power adapter fails, contact distributor or after-sales
department. When products falls out of warrantee period, users could still contact, consult or ask
mending at the distributor or service centre but service could be charged due to relevant part of
service cost.
3
The transmitter box: Uses a switching adapter rated at 100V ~ 240V AC 50/60Hz, the output power
is 7.5V DC and 2A.
4
The monitor: Uses a switching adapter rated at 100V ~ 240V AC 47/63Hz, the output power is
12V DC and 5A.
FCC illustration:
This Wireless Display has been tested to comply with FCC standards
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This computer equipment generates, uses, and can radiate radiofrequency energy. If it is not
installed and used properly, it may cause interference with radio and television reception.
This equipment has been tested and found to comply with the limits for a Class B digital device in
accordance with the specifications in Part 15 of FCC rules. These specifications are designed to
provide reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation.