DVD player not working
properly Ensure disc is correctly inserted into the player. Ensure the
disc is not
damaged and with correct format. Please wait
patiently as some discs
need longer time to play.
Problem
Possible cause
Action
No picture, no sound
and the front panel red
LED is not on.
Your Receiver is not plugged into
the mains.
Check mains connection and press
the Standby key on the Remote
Control.
No picture, no sound,
but the front panel red
LED is on.
Your receiver is in standby mode.
Press either <P+> or <P->, Menu or
any number key to bring your receiver
out of standby.
No picture, no sound,
but the front panel
green LED is on.
• You are viewing standard
analogue television.
• The SCART connection to the
TV is faulty or loose.
• Press the <TV/STB> key on the
Remote Control.
• Check SCART TV connection.
The remote Control
does not operate.
• A timer is running, the receiver is
locked (all the
remote control
keys are inactive), the front panel
LED is blinking.
• Press the <timer> key and the <0>
key successively to cancel the timer
and unlock the receiver.
• The Remote Control batteries
have been inserted incorrectly or
are dead.
• Check the batteries and replace if
necessary.
• You are not aiming you Remote
Control at the receiver.
• Make sure you aim the Remote
Control at the receiver and not at TV
You cannot find all the
channels you think
should be available.
The signal to your aerial may be
weak.
Try retuning your receiver (see §6.4).
You cannot select all
of the
channels and
the <P+/P-> or <Arrow
down/up> keys do not
always work.
Some channels have been
selected as favorites and the
favorites mode is on.
Use the <All channels> key to select
another Favorite list or the default TV
channels list.
You cannot access a
particular channel,
even using the
number keys.
The parental lock has been
activated on this channel and an
OSD message prompts you for
your PIN code.
Enter your parental code to access
the
channel or unlock the channel. See
§6.5.3 for more details.
You have forgotten
your PIN code.
When prompted for your PIN code, enter the Master PIN code. This will
allow you to proceed as well as reset the PIN code to the default PIN code
of the
receiver (default is “0000”).The Master PIN code is “RED
REDGREEN GREEN YELLOW YELLOW
BLUE BLUE”. Note : keep this
code secret to prevent your children from using it.
I set the timer but it
did not record what
wanted.
• Make sure the time of your VCR is set to the same time as your receiver.
• Make sure the timer is still on the list. It may have been deleted by a
“new” installation.
I set the timer but
there is no audio on
the record.
The Dolby Digital audio may
have been selected.
To record a video, do not set the
audio to “Dolby Digital” because it
cannot be played on the VCR SCART.
Each time I set a
timer, the PIN code is
requested
The maturity level access control
is set
Set the maturity level access control
to
None or prefer lock specific channels.
The on-screen
displays are not as
sharp as expected.
• If you have connected using
SCART and you have an
RGB-capable TV, on of the
receiver settings could be wrong.
• Refer to §6.2.1 and modify the “TV
Output signal” setting to RGB.