AquaScape 84063 Installation Instructions Download Page 2

 

US (866) 877-6637 | 

 

CAN (866) 766-3426 | aquascapeinc.com

Warranty Information

For more information about our company or products, please visit our website at aquascapeinc.com  

or call us at US (866) 877-6637 CAN (866) 766-3426

©2020 Aquascape, Inc. • All Worldwide Rights Reserved

86373-84063-84064 • 08/20

5 YEAR WARRANTY

Aquascape warrants that the Path and Area Lights will be free of manufacturing defects 

for five years after date of purchase. Proof of purchase required. Warranty does not cover 

damage resulting from electrical supply problems, improper wiring, lightning, negligent 
handling, misuse, or lack of reasonable maintenance or care. This product should only 

be operated in fresh water without corrosive chemicals like chlorine or bromine. If upon 

Aquascape’s inspection, the lights shows evidence of a manufacturing defect, Aquascape’s 

liability is limited, at Aquascape’s option, to the repair of the defect, or the replacement 

of the defective product or refund of the original purchase price. The warranty excludes 

costs of labor, removal of product, shipping and expenses related to the installation and 

re-installation of the product. No liability for loss or damage of any nature or kind, whether 

arising out of or from the use of the product, whether defective or not defective, is assumed 

by Aquascape, Inc. or its affiliates. Aquascape shall not be liable for any incidental, 

consequential or other damages arising under any theory of law whatsoever.

Fixture Dimensions

6.5" x 6.5" x 18.25" 

16.51 cm x 16.51 cm x 46.48 cm

Fixture Material

Brass

Voltage Min – Max

9V – 15V

Wattage

3-Watts

Lumens

270

Kelvin Temperature

2700

Color Rendering Index (CRI)

80

Beam Angle

120° (#84063) / 90° (#84064)

Beam Spread Diameter

6.5'/2 m (#84063) 6'/1.8 m (#84064)

Bulb Life Span (L70)

25,000 hours

Cord Length

3'/0.91 m

Replacement Parts

•  Light is not illuminating

 

– The bulb connection may be loose. Check to make sure the LED is fully 

inserted into the socket.

 

– Power to the light has been lost. Check lighting to make sure all 

connections are fully connected and the ground fault breaker is not 
activated.

 

– LED bulb could be beyond its life expectancy. Replace the bulb with a new 

G4 3-Watt LED bulb. 

Troubleshooting

•  Aquascape Path and Area Lights are virtually maintenance-free, requiring 

little to no maintenance throughout the year.

•  The included 3-Watt LED bulb is rated with a 25,000 hour life span. When 

it is time to change the bulb, simply remove the shade and protective 
acrylic lens to access the bulb and replace it with a new G4 3-Watt LED 
bulb. Refer to the Replacement Parts section below for more information.

General Maintenance

STEP 1

UNPACK AND ASSEMBLE STEM

•  Carefully unpack the components.
•  Assemble the two-piece light stem by threading 

the two pieces together in a clockwise motion.

STEP 2

CONNECT STAKE

•  Thread the heavy-duty stake clockwise onto the 

bottom of the stem.

STEP 3

INSTALL BULB

•  Install the bulb into the socket at the top of the 

fixture. Be careful to not damage the prongs on 
the bulb.

STEP 4

INSTALL PROTECTIVE LENS

•  Guide the protective acrylic 

lens over the bulb and thread 
it onto the top of the stem.

STEP 5

ATTACH SHADE

•  Attach the shade to the lens.

STEP 6

INSTALL IN DESIRED LOCATION

•  Insert the heavy-duty stake into the 

ground in the desired location.

STEP 7

CONNECT TO POWER 
SOURCE

•  Connect the quick-connect 

fitting to a 12 volt low-voltage 
outdoor-rated transformer, 
splitter, or LVL extension 
cable. The light can also be wired directly into a pre-existing low voltage 
lighting system by cutting off the quick-connect fitting and using a 
commercially available wiring device suitable for outdoor applications per 
local codes.

STEP 8

HIDE CORD

•  Hide the lead wire/cord using landscape materials such as mulch or soil. 

It is recommended to bury low voltage cables 6" or less.

STEP 9

PLUG IN TRANSFORMER

•  Plug the transformer into a ground fault circuit 

interrupter (GFCI) rated receptacle and enjoy!

No.

Item number/description

1. 

84067 – Path and Area 3-Watt LED Bulb

Path and Area Light Replacement Parts

Path and Area LED Landscape Light Specs

Installation

Reviews: