OR
3
1
2
No.
Item number/description
1.
84035 1-Watt 12V LED Spotlight G2 Replacement Mounting Kit
2.
84036 3/6-Watt 12V LED Light G2 Replacement Mounting Kit
3.
84037 1-Watt LED Waterfall G2 Replacement Base
LED LIGHT REPLACEMENT PARTS / KITS
NOTE: Light failure as a result of improper wiring is
not covered under warranty.
E468959
☎
US 1-866-877-6637 |
☎
CAN 1-866-766-3426 | www.aquascapeinc.com
For more information about our company or products, please visit our website at
www.aquascapeinc.com or call us at (US) 1-866-877-6637 (CAN) 1-866-766-3426
©2014 Aquascape, Inc. • All Worldwide Rights Reserved
84041.112013
ASSEMBLY
(Item #84032)
LIGHT HOLDER
• The light holder provides a stable base to hold the
Waterfall & Up Light in place when positioned in moving
water or beneath a waterfall. The light can be removed
from the base if desired.
ELECTRICAL CONNECTIONS
• The light fi xture is designed to operate on a 12 volt
low voltage outdoor-rated transformer. The light has a
maximum voltage operating range between 9-15 volts.
Operating the fi xture outside of this voltage range voids
the product warranty and may damage or shorten the life
of the LED’s.
• It is recommended to locate the transformer as close
to the light fi xtures as possible in order to avoid voltage
drops caused by long electrical cable runs.
• For your convenience each light includes a 12-volt
Quick-Connect at the end of the electrical cable providing
tool-free electrical connection from the transformer to
the light. Additional Quick-Connect 12-volt accessories,
such as 3-way (item# 98486) and 6-way (item# 94022)
splitters, as well as extension cables (item# 98998) are
also available to help complete your lighting project.
• The light can also be wired directly into a pre-existing low
voltage lighting system. Cut off Quick-Connect and use a
commercially available wiring device suitable for outdoor
applications per local codes.
• It is recommended to bury low voltage cables 6” or less.
REPLACEMENT PARTS
ADJUSTING LIGHT ANGLE
•
1-watt, 3-watt and, 6-watt
– To adjust the angle,
push up or down on the light holder until it “clicks”
into desired position.
