Once filter is installed, plug filtration dock into an electrical outlet.
Flush the System for one Cycle
with dispenser or pitcher
Dispenser
• Place lid on dispenser.
• Fill dispenser with cold water through
drop-shape.
• Place dispenser on the filtration dock
until fully locked in.
• Hold dispenser button down until
all water has filtered
through the unit. Discard
water. Flushing is
complete.
Pitcher
• Place lid on pitcher.
• Fill center reservoir with cold water through
drop-shaped opening.
• Place pitcher on filtration dock until locked
in. It will automatically filter and run until
center reservoir is empty.
• Wait for blue light to turn off.
• Remove pitcher and discard water.
Flushing is complete.
WATER
DISPENSE
BUTTON
Please note:
Water may leak from circular valve when placing dispenser onto dock.
It
may take
2-4 MINUTES
or more for water
to begin flowing
on 1st run
To dispense filtered water, push button
on reservoir lid. There will be a 5-10
second delay for water to filter through.
Please wait for system to finish filtering
before removing the dispenser from
the dock.
Once dispenser is removed there may
be residual water left on the dock; this
is normal.
The system will run until the center
reservoir is completely empty. Do
not refill center reservoir if water
remains in outer reservoir.
Please wait for blue
light to turn off before removing
pitcher
from dock.
