23
Styling nozzle
The styling nozzle makes it possible to target the air flow at specific
sections of hair.
CAUTION!
Attach the styling nozzle to the hair dryer so that
it locks into place in a horizontal position.
Be sure to observe the arrow markings located
on the underside of the appliance and on the
styling nozzle.
q
r
The styling nozzle cannot be rotated and must therefore
only be used in a horizontal position.
• You can remove the cooled styling nozzle from the hair dryer.
06. Cleaning
DANGER!
Before cleaning, pull out the mains plug and allow the
device to cool down.
WARNING!
Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that the air
inlet and air outlet are free from dust, hairs and fluff.
• Wipe down the casing, the safety mesh over the air inlet and the
styling nozzle with a slightly damp cloth.
• Remove the styling nozzle from the hair dryer. Hold the hair dryer
with the air outlet facing downwards. Clean the safety fins with
a brush.
• Slightly press the safety mesh on the sides and
then pull it off. Hold the hair dryer with the air
inlet facing downwards. Clean the inside and
outside safety mesh with a brush.
