AquaTelemetry Instruction Manual
10401-01193 Rev H
If the AquaTelemetry unit detects an Alert state, it will log the data at the Alert Log Interval
and upload data by email more often.
To set the Alert Log Interval, send the following message to the AquaTelemetry unit as an
SMS.
ALERT LOG INTERVAL=HH:MM or AL=HH:MM
The value sent for this setting must be shorter than the regular logging interval that was set
in section
If, for example the unit is set to log every hour, a typical Alert Log Interval would be 00:15,
i.e. fifteen minutes.
This means that when an Alert is active, the unit will log data four times more often than
normal.
4.3.4. Log Upload Interval in Alert Mode
The relationship between normal and alert logging rates is reflected in the Log Upload
Interval.
For example, if the unit is set to log data every hour and upload data every 24 hours in
normal mode, and has been set to log data every 15 minutes in Alert mode (i.e. four times
more often), the Log Upload Interval will be automatically decreased from 24 hours to 6
hours (i.e. four times more often) when in Alert mode.
4.4. Phone Book Maintenance
4.4.1. Phone Book Query (Administrators only)
In order to query any phone book entry in the AquaTelemetry unit, send the following SMS
message:
PBXX=?
Where XX is the phone book entry reference (01 – 50).
So, to query phone book location 05, you would send: PB05=?
The AquaTelemetry unit will respond with its site ID and the requested phone number. For
example:
SITE=XXXXXXXXXXXXXXXX
PB05=U447881324678
If the requested phone book entry is not assigned, the unit will respond with:
SITE=XXXXXXXXXXXXXXXX
PBXX=
4.4.2. Setting a Phone Book Entry (Administrators Only)
Phone book entries MUST be sent in the international format including the country code but
excluding the l and any spaces.
Each phone book entry must also be preceded by either an 'A' or a 'U' to indicate whether
that number belongs to an Administrator or a User.
© 2020 Aquaread
®
Ltd.
www.aquaread.com
Page 25 of 34
