HOTLINE
1300 278 283
PHONE
+61 (8) 6260 1000
WEB
WWW.AQUAPROONLINE.COM.AU
AP1050 / AP3000
PUMP
INSTRUCTIONS
• All AQUAPRO submersible pumps are water
cooled; if pump becomes restricted it will overheat
and could cause permanent damage. Ensure pump
does not become blocked or restricted.
• The power cord cannot be replaced,
if the cord is damaged, the pump must
be discarded.
• The impellor set is a wearing consumable part.
Regular inspections, cleaning and maintenance of
impellor is necessary to ensure longer impellor life.
• If the impellor set becomes worn or damaged it
should be replaced (available from your dealer or
special orders). Failure to do so may cause serious
damage to pump.
1. FRONT CAGE 2. BIO-SPONGE 3. FLOW CONTROLLER
4. IMPELLOR COVER 5. O RING 6. IMPELLOR 7. MOTOR
1. Disconnect the power cord from the power supply
before performing maintenance.
2. Remove the pump from water, detach tubing/
fountain kit and remove front cage from pump.
3. Remove the impellor locking ring/ cover by either
turning anti-clockwise and pulling out.
4. Gently remove the impellor and shaft, use long nose
pliers if needed. Take care not to break ceramic shaft
(if applicable) because they are brittle.
5. Clean impellor, checking for any signs of wear or
damage.
6. Reinstall the shaft, and then carefully slide the
impellor onto the shaft. The impellor will pull itself in
by magnetic force, this is normal. (Take care not to
pinch your fingers).
7. Replace the impellor cover making sure the shaft is
located properly on the impellor cover.
8. Replace the front cage.
9. Re-attach tubing/fountain kit, submerse in water,
connect to power supply and turn on.
MAINTENANCE
PART DESCRIPTION
DISCONNECT POWER CORD FROM THE POWER SUPPLY BEFORE PERFORMING
MAINTENANCE. NEVER LIFT THE PUMP BY THE POWER CORD.
NOTE:
PLEASE CONSULT YOUR RETAILER FOR QUALITY ORIGINAL
AQUAPRO REPLACEMENT PARTS FOR YOUR AQUAPRO PRODUCT.
VISIT WWW.AQUAPROONLINE.COM.AU FOR NEAREST STOCKISTS.
4
1
3
5
6
7
2
AQUAPRO AP1050/AP3000 Instructions.indd 3
AQUAPRO AP1050/AP3000 Instructions.indd 3
22/9/21 1:54 pm
22/9/21 1:54 pm
