INSTALLATION AND OPERATING INSTRUCTIONS
11
Problem
Possible Causes
What To Do
Leaking from
top/bottom of unit
If Filter bottle O ring is not correctly
installed leaking may occur.
Remove filtered water chamber off unit and reinstall the
filter bottle O ring.
WARNING:
Filter bottle O ring may
come off when you remove the filter bottle from the cooler,
please ensure it is located correctly before reinstalling
the filter bottle.
Drain plug at bottom of unit not closed fully.
Check drain plug located at bottom of unit is closed and
sealed completely.
Not cooling
Unit not plugged into wall socket or wall
socket not switched on
Check connection to wall socket.
Check power switch on back of unit is on.
Unit uses thermoelectric chip to chill water, performance
of unit is dependent on room temperature. Cooing light will
remain on when unit is attempting to cool water to optimal
temperature.
Noise from fan
Due to transport or knock to side panel, the
fan may have moved to a different position
- this will cause a noise.
Call customer care 1300 764 325
Bad taste
from cooler
New, new silicone, new tap.
Replace filter, remove filter bottle and wash thoroughly. Place
a tablespoon of bi-carb soda mixed with warm water approx.
1 litre, pour in cooler until the tap reservoir is full, leave
overnight and then flush 1-2 litres of filtered water through
the unit until the bi-carb solution has been flushed clean.
Build up of bacteria.
