AQUAMOTION, INC.
• 88C Jefferson Blvd • Warwick, RI 02888
Tel: 401-785-3000
• Fax: 401-785-3033 • [email protected] • www.AquaMotionHVAC.com
14. Plug the Aquastat Piggyback into the nearest 3 prong
wall outlet.
15. Plug the circulator into the Piggyback Aquastat and clip
the Aquastat to the dedicated return line tubing. Note; the
Aquastat power cord is 8 feet long. To minimize the runtime
of the circulator the Aquastat should be clipped to the return
line as far away from the circulator as the cord will allow.
16. Plug the circulator into the back side of the Aquastat
piggyback plug Note: Initially the circulator will run
continuously until the hot water tank has re-heated the
water unless the timer is set to an off cycle.
Circulators are of stainless construction
All Fittings are lead free
AquaMotionHot Two AMH2K-7
Complete Kit Picture
Installation Diagram AquaMotionHot Two