Aquametro Oil & Marine CONTOIL VZD2, Mounting And Operating Instructions

Page: 34 / 36

34
11.4 Settings list
Menu level 1 Menu level 2 Menu level 3 description value
OutPutS Digital outputs
Fc select function Impulse
IMPULS digital output pulses
SG select output signal Volume
UP pulse value ( 0.01 , 0.001-1000) 0.01
MS pulse width (
20
, 2-500) 20
LIMIT 1 1 point limit switch
SG select signal the limit applies
L1

limit value; (
Qcont
, 0 to full range of size)
HY (+/-%) hysteresis of value (
5
, 0.0-99.9)%
Ac acting logic function ( NO /NC)
LIMIT 2 2 point limit switch (min/max)
SG select signal the limit applies
L1

limit value min ( Qmin , 0 to full range of size)
L2

limit value max (
Qcont
, 0 to full range of size)
HY (+/-%) hysteresis of value min / max (
5
, 0.0-99.9)%
Ac acting logic function ( NO /NC)
StAtuS acts on alarm or error status
Ac acting logic function (
NO
/NC)
Int-BUS Internal bus communication in single mode
Fc select function Modbus
ModbuS Modbus RS485
Ad Address ( 1 , 1-247) 1
BA Bauderate 9600
PA Parity None
M-BUS M-Bus RS485
Ad Address; ( 0 , 0-250)
SE Secondary address
BA Bauderate
UnItS
Units
V units for volume V
Vd decimals for volume value 0.001
M units for mass Kg
Md decimals for mass value 0.001
Qv units for volume flow L/h
Qm units for mass flow Kg/h
t units for temperatur °C
VP units for volume pulse L
MP units for mass pulse Kg
ConFIG System configuration
CM fuel compensation off
tt temperature threshold ( 60°C , 20-90) 60°C
SYSINFO System Information
SN ######## Serial number
tA ######## Customer tag name
CF 0.0000 correction factor (%)
FW 00.00.00 Firmware version