9
Fig. 4: Flat sealing (1), passe-partout (2)
LEDspot 200 W:
Fig. 5: Sequence for the 200 W spot:
1. Retaining ring
2. Lens
3. Silicone retaining ring
4. Passe-partout
5. Flat sealing
6. Electric connection:
The
LEDspot
can be connected to a timeswitch or a PWM timer if automatic operation is desired
or can be
controlled by 0 – 10 V
(e. g.
Qube Control
plus power supply and control cable or manually via a
potentionmeter
).
A power plug is not included. The cable for the power supply and the control cable come out
of the light from above and must not be mixed up.
When working on the light, always pull all power plugs!
