4
Install the pump
5
Separete the bubble counter, and take off the
air hose to fill in freshwater, and once it’s 3/4
full, install the check valve to the bottom of
bubble counter.
6
Reinstall the inlet filter, and install the holder onto the lid.
7
Connect the bubble counter to the central, the inlet to the pump.
Tips:
block the bottom of bubble counter by
your finger and put it into water, you can
easily fill it off.
How to separate the hose?
8
Cut a suitable length of the included white tubing for the inlet and outlet. Connect the feeding pump to the inlet, and CO
₂
regulator to the reactor.
9
Take off the lid of pH probe holder to install the pH test probe
DO NOT PULL OUT THE TUBING DIRECTLY
AS THIS WILL DAMAGE THE FITTINGS
2
1
2
3
inlet
CO
2
outlet
PUMP
DOSING PUMP
CO
2
inlet
outlet
to middle tube
to inlet
(1)
(2)
(3)
remove the blue clip
press down the small
white collar
pulling out the tubing
