Thank you
Thank you for choosing our Aqua Master Tools Combo meter P700 Pro. This
monitor is part of our line of quality monitors. Thanks to its microprocessor
technology, the Aqua Master Tools Combo offers many reliable, user-friendly
features.
This monitor is designed for long-term, low-maintenance use. Just plug in
the AC adapter, calibrate and the unit is ready for continuous monitoring.
A rechargeable battery is included, so even when you have no access to
power, you will still be able to use the monitor and do not need to purchase
batteries.
Operation
1. Simply plug the AC adapter into a power outlet and the USB connector
into the monitor.
2. Connect the pH electrode to the probe inset of the instrument.
3. Remove the pH and EC electrodes’ protective cover.
4. Turn on the meter.
5. Immerse the pH and EC electrodes in the fluid you would like to test and
stir gently until the reading stabilises.
6. Press the C/F key, to switch between Celsius and Fahrenheit.
7. Press the MODE key to cycle through measurements of EC, CF and PPM.
8. Turn off the meter after use.
9. Rinse the pH and EC electrodes using tap water to minimize
contamination.
10. Replace the EC electrode’s protective cover.
11. Fill the pH electrode’s protective cover with storage solution and replace
the cover.
12. You can also use the meter continuously by leaving the electrodes in
the fluid that you would like to test. Please note that when the meter is
used continuously, it will require calibration on a regular basis. It is also
important to regularly check for algae infestation and to carefully clean
the electrodes when needed.
