Visit our website to see more of our products.
www.AquaLogicInc.com
Aqua Logic, Inc.
9558 Camino Ruiz.
San Diego, CA. 92126
PH: 858.292.4773
email: [email protected]
www.AquaLogicInc.com
© 2017 Aqua Logic, Inc. Rev 1
DC SERIES DUAL STAGE DIGITAL TEMPERATURE
CONTROL INSTRUCTION MANUAL FOR ALL DSHP
HEAT PUMPS
Model No. DC-DSHP
Thank you for purchasing our digital temperature controller. It is
designed to provide on/off control for commercial heating and cooling
applications. It is equipped with a red LED display that provides a
constant readout of the water temperature, and a touch keypad that
allows the user to easily and accurately select the setpoint
temperature, differential and heating / cooling modes of operation.
The control enclosure has an NEMA 4X rating but, if installed
outdoors, it should be protected against the direct weather.
Installation.
1. Mount control on a wall or any vertical surface that water
can’t splash on it.
2. Install the titanium temperature sensor in your tank or sump.
Careful not to submerse beyond the warning label.
Note:
For your safety, you must plug the HEAT PUMP into a dedicated 15 or
20 Amp. GFIC (Ground Fault Interruption Circuit) circuit. When installing the
control in a wet area make sure to have the power cords with drip loops so
water does not collect around the electrical connections.
Inline Titanium heaters
1 kW thru 60 kW
Safety water flow
cutout switches
1” thru 3” pipe
TLC Trimline Cyclone Drop-
in coil water chillers -1/4
and 1/3 HP
Delta-Star inline water
chillers. -1/4 thru 1-1/2 HP
