Aquagarden Essentials PondVac, Instruction Manual

Page: 8 / 12

06
I Pond Vac Instruction Manual Pond Vac Instruction Manual I
07
How to use your Pond Vac
As a Pond sludge removal unit.
• Never operate without filter foam.
• Place the Vac at the minimum distance of 1.5m from the pond edge.
• Ensure a safe and stable position.
• Remove drain valve lid.
• Plug the discharge hose into the drain valve outlet of the vac drum.
• Make sure drainage valve outlet is above the water level.
• Ensure the discharge hose sits flat and avoid kinks.
• Attach suction extension tubes and desired accessory.
• Switch the pond vacuum on, please note there will be a delay in power while the
vacuum cycles through its 60 second cycle.
• Use vac to remove debris
• It will vacuum until the unit is full and then stops while it automatically drains
through the discharge hose and then restarts (auto cycle)
Switch mode
Please note that there will be a delay in power supply while the vacuum cycles
through its 60 second auto cycle.
30 seconds on vacuuming and 30 seconds off vacuuming while it drains is
normal operation.