AF270-1
Aquaflex Cellular Hub
The Cellular logger can be connected to many different types of sensors including flow meters, rain Gauges, air
temperature sensors and SDI-12 sensors including Aquaflex. These optional sensors can be purchased additionally to
the Aquaflex Cellular kit and can be added at any time.
The Aquaflex Cellular logger will be pre-configured so it can recognise when a sensor is connected.
Data from the connected sensors will automatically be logged and sent to the Streats API.
The Aquaflex Cellular Hub has a solar panel to keep the internal batteries charged. The auxiliary power input is used for
installations where the solar cell will not receive sufficient sunlight and where it is impractical to replace the batteries.
Mounting the Aquaflex Cellular Hub
The Aquaflex Cellular Hub should be mounted within reach of the Aquaflex sensor data cable
(and cables from
Auxiliary sensors if fitted) and in a position where it won’t be damaged by
stock, or submerged in water etc. The solar panel on the top of the Aquaflex Cellular Hub
should be exposed to as much sunlight as possible.
An existing fence post is often ideal, if there isn’t an existing fencepost available a new post
could be installed.
The backing plate has several pre-drilled holes to aid the mounting of the Aquaflex Cellular
Hub.
Tips for mounting the Aquaflex Cellular Hub:
•
Check that the Aquaflex sensor data cable is long enough. Optional extension cable lengths are available if
required.
•
The batteries will not charge unless the Aquaflex Cellular Hub is located to get sunlight or external power is
supplied.
•
If mounting to a post use the supplied cable ties to secure the cable(s) to the post.
Mounting steps:
•
Hold the Aquaflex Cellular Hub in position. If the material is a hard wood or metal then mark the hole positions and
drill to an appropriate size for the screws being used.
•
Insert the screw through the mounting plate and tighten. Ensure at least two screws are securing the Aquaflex
Cellular Hub.
•
Make sure to protect the unit if there is ever going to be livestock present, the most common method of protection
is to extend an electric fence around the unit to keep livestock away from it
Connecting sensors
Sensors are connected via the 4 connectors at the bottom of the Aquaflex Cellular Hub.
Each sensor type will only fit into its corresponding connector.
Use the following diagram to determine where the connectors are located.
