Aquadistri BlueMarine Multi Reactor 800 Instruction Manual Download Page 4

4

Safety

1.   Read carefully before usage.
2.   The MultiReactor is only suitable for indoor use.
3.   This appliance is not intended for use by persons (including children) with reduced physical, 
 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

 

given supervision or instruction concerning use of the appliance by a person responsible for 

 

their safety. Special care should be taken with the use of electrical equipment by or near 

 children.

Installation

1.  Open the 5 nylon screws on the cover of the media chamber and rotate clockwise, and place
 

the stand pipe with the mounted perforated plate into the filter first

2.  Add media, fill the MultiReactor up to half full maximum (the filter material has to swirl). 
3.  Mount the second perforated plate after filling. When using very fine materials, a filter sponge  
 

must  be placed  underneath the perforated plate

4.  Put the cover back in place and check carefully that the seal ring stays in place. Close lid with  
 

the nylonscrews. 

5.  Connect the pump to the water inlet.
6.  Once you connected the water supply firstly fill the MultiReactor completely with 
 

water and check for any leakage.

7.  Now turn the pump on and check  again for any leakage.

Maintenance

1.  Check daily if your Reactor is functioning properly.
2.  Depending on what kind of media you are using, the size of your aquarium and the water  
 

quality you will need to replace your media from time to time, read the instruction on the  

 

media package for advice.

3.  Check and clean pump regularly to ensure it does not become clogged.

Technical data MultiReactor 800 

•  Aquarium size <800 ltr

•   Max flow 1200 L/h

•   Volume 1,5 ltr

Technical data MultiReactor 2000 

•  Aquarium size <2000 ltr

•   Max flow 2000 L/h

•   Volume 2,5 ltr

GB

Instruction Manual

Warranty

This warranty is valid for 2 year on materials and incorrect construction. Only units with a fully filled in warranty slip 
and official till receipt showing date of purchase will be considered. You must supply the entire unit with accessories 
in the event of a warranty claim. We will inform you on receipt whether the unit will be repaired or replaced. We 
accept no responsibility for damage as a result of incorrect use of the unit. Breakages
of parts not due to defects ex factory are not covered by this warranty.

Summary of Contents for BlueMarine Multi Reactor 800









Reviews: