Step 7:
press the vertical seal B(9)(3 strips) into the wall profile to secure the fixed panel(2)(G).
Step 8: Fit the middle hinge(5) onto the fixed panel(2)(H)
Step 9: Push the bottom seal (10) onto the bottom of the door panel(3) then carefully lift it onto the bath to secure it
onto the fixed panel(2)(I)
Step 10:Fix the support arm onto the fixed panel(J,K)
Step 11:Drop the silicone sealant onto the bottom corner of the bottom strip A(6) and platform of the end cap A(11),
then push the correct hand of the end cap A(11) onto the bottom strip A(6), drop the silicone sealant onto
the bottom groove of the bottom strip
B(7) then insert it into the end cap A(11)(L).
Step 12:Push the correct hand end cap B(12) onto the bottom strip B(7)(M).
Step 13:Press the vertical seal A (8) onto the fixed panel(2)(N).
Step 14: Push the wall profile top cap(3) onto the wall profile(1)(O)
24 HRS
DO NOT USE THE
ENCLOSURE FOR
24 HOURS AFTER
SEALING
Applying Silicone Sealant
Sealing Inside
Seal from the top of the wall profile to the bottom on the
INSIDE
between the wall profile and the wall.
IMPORTANT:
Do not apply sealant on inside of the tray.
Sealing Outside
Seal from the top of the wall profile to the bottom between the
wall profile and tiles on both sides. Also seal along the bottom
where the frame meets the tray. Seal the joints between the
bottom profile and any upright profiles.
