INSTALLATION INSTRUCTIONS
ST3.5X20
ST3.5X20
Q1
Step 6 Adjust the screw at the bottom of
the top roller to raise or lower the
door panel so it’s 100% level
with the fixed panel. Use the
same technique if the wheels do
not fit into the bottom rail.
(Diagram N)
.
Step 7 Fit the roller stoppers (no.23)
into the top and bottom rail then
secure it onto the rail profiles
using the allen wrench to tighten
the grub screw on the roller stopper.
Next fit the cover cap on.
Fit the rail profile end caps (no.21
22) onto the top and bottom rail
profile. (Diagram O).
Step 9. Fit the handle (no.14) onto the door panel.
(Diagram p).
N
P
O
Step 10. Press the vertical fixing seal (no.18/32)
into the wall profiles from bottom to top
to secure the glass panel.(Q1/Q2).
Step 11. Fix the wall profile top caps (no.19/no.33)
onto the wall profile use screws
ST 3.5x20 (no.20/no.34).
(Diagram R1/R2).
R1
R2
Q2
