J
Step
9
.
FIX FRONT PANEL GLASS
INSIDE
After the glass panel is in its final position press the seal into the wall profile securing from bottom to top Diagram J
N
6mm
P
Q
K
M
R
Step
10.
Measure the support bar tube length then
cut
it
to
the
required
size (Diagram K).
Fit the support bar onto the glass panel, ensure the support bar is level then mark the wall fixing hole onto the wall (Diagram L).
Step
11.
Step
12.
Drill the hole onto the wall through the marked points using 6mm masonry drill bit then insert wall plug(Diagram M/N).
Secure the wall fixing onto the wall using ST 4 x 30 screw then fix the support bar onto the wall fixing (Diagram O/P).
Step
13.
Secure the glass clamp onto the glass using 2 M8 grub screws (Diagram Q/R).
Step
14.
1
O
L
