AquaCraft GP-1 Ulta Instruction Manual Download Page 3

3

Warranty Service

AquaCraft

®

 will warrant your GP-1 Ultra Mini Hydroplane for 90 

days after purchase from defects in materials or workmanship 
of original manufacture. AquaCraft, at their discretion, will 
repair or replace the incorrectly made part at no charge. 

This warranty does not cover damage caused by crashes, 

abuse, misuse, alterations or accidents. To return your boat 
for repairs, you need to provide proof of purchase; your store 
receipt or product invoice will suffi ce. 

IN NO EVENT SHALL 

THE PURCHASER BE ENTITLED TO ANY INCIDENTAL, 

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, 

WHETHER RESULTING FROM THE USE, MISUSE OR 

INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN 

THE PRODUCT.

 This warranty gives you specifi c legal rights. 

You may also have other rights, which vary from state to state.

Outside the USA and Canada, contact your local importer for 
warranty information.

HOBBY SERVICES 

Ph: (217) 398-0007

Attn: Service Department 

9:00 am - 5:00 pm

3002 N. Apollo Drive, Suite 1 

Central Time M-F

Champaign, Illinois 61822

E-mail: [email protected]

Safety Precautions

Never ever attempt to swim after a stalled R/C boat. Do 

not get in the water for any reason to retrieve your boat. 

To aid in retrieving a stalled R/C boat, set up a fi shing 

reel with a tennis ball tied to the end of the line. Better 
yet, get yourself a small Jon boat so you can row out 
and pick up your boat. Remember to use a PFD any 
time you enter your retrieval craft.

  

AquaCraft products are to be used by ages 14 and over.

Do not touch the propeller anytime the motor is running. 
Pay equally close attention to items such as loose clothing, 

shirtsleeves, ties, scarves, long hair or anything that may 
become entangled in the spinning prop. If your fi ngers, 
hands, etc. come in contact with the spinning propeller, you 
may be severely injured.

  

The speed and mass of this boat can infl ict property damage 

and severe personal injury if a collision occurs. Never run this 
boat in the presence of swimmers or where the possibility 
of collision with people or property exists.

Electric motors produce heat. Do not touch any part of your 

motor until it has cooled.

  

This boat is controlled by radio signals, which are susceptible 
to possible interference from other possible electrical noise.

In the event that weeds become entangled in the propeller, 

stop the motor before attempting to remove them.

  

If your boat should happen to stall, water currents will slowly 

carry it to shore. Keep in mind that the boat could be carried 
to the opposite shore. When surveying areas to run your 

boat, keep variables in mind such as wind direction, and 
lake size. It is not advisable to run R/C boats on any free-
fl owing bodies of water such as creeks or rivers.

  

Always remove the battery pack from the boat before 

charging.

Specifi cations

GP-1 ULTRA MINI HYDROPLANE BOAT SPECIFICATIONS

 Hull 

length: 

 

16.4" [416 mm]

 Overall 

length: 

 

18" [458 mm]

 Width: 

 

8.8" [222 mm]

 Height: 

 

4" [102 mm]

 Weight: 

 

14.4oz [408 grams] (less battery)

 Run 

time: 

 

4 to 6 minutes

BOAT FEATURES

  

Tactic TTX240 2.4GHz transmitter with TR324 receiver

  

2200 kV brushless inrunner motor with aluminum 
water jacket

  

LiPo-ready (3S) 30 Amp brushless water-cooled 

motor controller with low battery warning system 
and battery cut-off circuit

  

Tough, lightweight ABS construction with square 

hatch opening for easy taping

  

Great-looking, pre-applied GP-1 graphics

OTHER FEATURES

  

Adjustable strut

  

Music-wire drive shaft

  

Pinch wire motor coupler

  

Break-away wedge rudder

  

One-piece aluminum turn fi n

  

1/8" [3.2mm] prop shaft

  

Two blade 30mm FRP propeller

  

Transom drain plug

MOTOR

 KV 

rating: 

2200 kV 

11.1V

 

Operating current:  1.4 A, 8V/ DC

 (without 

loading)

 

Input:  8 to 14V

 

Max current:  28 A /15 Seconds

 

Shaft diameter:  3.2 mm (1/8")

 

Motor resistance:  50 m

 Dimensions: 

27.5 

 30 mm (1.1" 

 1.2")

 

Weight:  71 grams (2.5 oz)

MOTOR CONTROLLER

 Rated 

Current: 

 

30 amp

 Battery 

Connector: 

Deans

®

 Ultra Plug

®

 Motor 

Connector: 

 

3.5 mm Bullet Plugs

 Wire 

Gauge: 

 

14G

 Warning 

System: 

 

9.6V Stutter Bump

 LVC: 

 

9V

 

BEC Max Current:   2A

 PWM: 

 

8K

 Dimensions: 

 

1.8" 

 0.9" 

 0.4"

(45 mm 

 24 mm 

 9 mm)

AQUB1820 GP-1 Mini.indd   3

AQUB1820 GP-1 Mini.indd   3

5/22/2013   1:22:48 PM

5/22/2013   1:22:48 PM

Summary of Contents for GP-1 Ulta









Reviews: