1.Fill the water without the inner lid to the rim,
but
leave the lid open
so that the air gases
expelled by the hydrogen can escape.
2.Press the action button once when the
display is lit to activate the 3-minute phase
(operating mode 1).
3.After the announcement: "Generating
hydrogen water completed”, screw the lid
tightly shut.
4.Press the action button twice while the
display is lit to activate the 5-minute phase
(operating mode 2).
As the gas bubble above the water now
contains almost pure H
2
, more hydrogen in the
water dissolves itself.
Hydrogen
water
PEM-Cell
Screw top
O
2
/O
3
&
Condensation
Mix gas bubble
O2/N2/CO2/H2
Degassing
O2/N2/CO2
Hydrogen
water
3 minutes
open
PEM-Cell
O
2
/O
3
&
Condensation
Hydrogen
water
5 minutes
closed
PEM-Cell
Screw top
O
2
/O
3
&
Condensation
Hydrogen gas
Not only through multiple production cycles in a row, (maximum 30 minutes at a time), can the achievable
hydrogen content can be increased. Namely, what reduces the power of the hydrogen-water generator is
the gas content of the water before production. These are mainly the atmospheric gases oxygen, nitrogen
and carbon dioxide, which according to Henry's Law always dissolve in proportion to the composition of the
atmosphere in the water. Put simply, these gases must first be expelled from the water so that the hydrogen in
it is better saturated.
14 Increasing the hydrogen content
