Before your first use and if the device has not been used
for more than 1 week please rinse it. Pour a teaspoon of
vinegar into the water container, close it tightly with the
handle lid and shake vigorously for 30 seconds. Then
rinse with plenty of water.
Attention! Important for validating your
guarantee:
•
•
•
•
•
The outside of the device can be cleaned with a cloth or a
micro-fiber cloth. Do not allow water into the base of the
electrolysis unit.
The water container can be cleaned with washing up liquid
when unscrewed.
If you should find limescale traces on the electrodes, then
fill the water container with a domestic limescale remover
(an organic, liquid decalcifier) 2 cm high and let it work for
30 minutes. Afterwards, shake well and rinse with clean
water. With use this could be necessary every 2 - 3 weeks
with hard water. Limescale on the electrodes handicaps
the electrolysis performance.
6
