Aquacal GBB BB500, Operation Manual

Page: 6 / 51

Page - 3
1 - Operation
IN THIS SECTION:
1.1 Wake Up Heat Pump 3
1.2 Display Panel 3
1.3 Activate Heat Mode, Cool Mode, Auto Mode, or Deactivate Equipment 6
1.4 Set Temperature 7
1.5 Set Up Programming 7
1.5.a Factory Defaults 7
1.5.b Selecting Celsius or Fahrenheit 8
1.5.c Setting Date and Time 9
1.5.d Setting Date and Time Format 10
1.5.e Using Entry Code to Access Heat Pump 13
1.5.f Setting Entry Code Option 13
1.5.g Disabling Entry Code Option 15
1.6 External Equipment 16
1.6.a Operating Heat Pump with a Call Flex 16
1.6.b Operating Heat Pump (With an External Controller) 19
1.6.c Operating Heat Pump (With an External Flow Switch) 19
1.6.d Operating Heat Pump (With a Gas Back Up) 19
1.6.e Operating Multiple Connected Heat Pumps 24
1.1 Wake Up Heat Pump
The display back light will be off when the heat pump is in
sleep mode. To wake up the heat pump, slowly slide a finger
across the buttons.
l
The display will illuminate.
l
The message "KEYPAD UNLOCKED" will briefly appear.
l
Then the water temperature and mode will display.
1.2 Display Panel
Display Panel
The following information outlines the operation for a standard installation.
l
Control Buttons will operate differently for custom installations; such as
when a heat pump is connected to an external controller or multiple heat pump
configuration.
l
See "Operating Heat Pump (With an External Controller)" on page 19.
l
See "Operating Multiple Connected Heat Pumps" on page 24.
1
-
O
pe
ra
ti
on