background image

16

Residential Steambath       

warranty

Limited Lifetime Warranty

aquasteam

 extends to the original consumer purchaser of a 

aquasteam. 

RESIDENTIAL STEAMBATH GENERATOR 

(aquasteam Generator), installed in the United States or 
Canada (excluding controls and accessories), a warranty that 
such 

aquasteam

 Generator is free from defects in materials 

and workmanship. aquasteam will repair or replace at its 
option a  Generator if it fails to conform to this warranty.

Limited One Year Warranty for Controls and Accessories

aquasteam

 extends to the original consumer purchaser of a 

Control or Accessory for a 

aquasteam

 RESIDENTIAL steambath 

generator which is installed in the United
States or Canada, a one year limited warranty that such 
aquasteam control and accessory is free from defects in 
materials and workmanship. 

aquasteam

 still repair or replace 

at its option a 

aquasteam

 control or accessory if it fails to 

conform to this warranty.

Terms, Conditions, and Exclusions

This warranty is non-transferable. All warranties for a 

aquasteam

 Generator and 

aquasteam

 control or accessory 

(collectively, 

aquasteam

Products) apply only to the original 

consumer purchaser
This warranty does not apply to a 

aquasteam

 Product which is 

sold “as is” or in a damaged condition or is installed for use in 
other than a residential steambathing application.
This warranty does not apply to repairs or replacement 
necessitated by any cause beyond the control of aquasteam-
including, but not limited to, any malfunction, defect, or 
failure caused by or resulting from unauthorized service or 
parts, improper maintenance, and/or problems arising due to 
local water conditions, operation contrary to furnished 
instructions, damages occurring during shipment, transit, 
storage, or handling, or arising from modification or repair by 
any person not authorized by aquasteam, abuse, misuse, 
neglect, accident, incorrect power line voltage, fire, freezing, 
flood, or other Acts of God.
AQUASTEAM  PRODUCTS MUST BE INSTALLED, OPERATED, 
AND MAINTAINED IN ACCORDANCEWITH aquasteam’S 
INSTRUCTIONS. FAILURE TO FOLLOWTHE INSTALLATION, 
OPERATION,OR MAINTENANCE PROCEDURES OR USE OF 
UNAUTHORIZED PARTS AUTOMATICALLY VOIDS THIS LIMITED 
WARRANTY. The original consumer purchaser is responsible 
for the suitability of the 

aquasteam

 Product for the applica-

tion intended by such original consumer  purchaser. This 
limited warranty does not cover any costs incurred for the 
removal or reinstallation of the 

aquasteam 

Product. 

THIS WARRANTY DOES NOT APPLY TO AQUASTEAM PROD-
UCTS WHICH ARE USED FOR ANY NON-RESIDENTIAL OR 
COMMERCIAL PURPOSE. THE FOREGOING IS IN LIEU OF ALL 
EXPRESS OR IMPLIED WARRANTIES AND AQUASTEAM DOES 
NOT ASSUME OR AUTHORIZE ANY PARTY TO ASSUME FOR IT 
ANY OTHER OBLIGATION OR LIABILITY. THERE ARE NOWAR-
RANTIES WHICH EXTEND BEYOND THE DESCRIPTION 
CONTAINED HEREIN AND SPECIFICALLY LIABILITY FOR ANY 
BREACH OF ANY IMPLIED WARRANTY OF MERCHANTABILITY 
OR FITNESS FOR A PURPOSE IS EXCLUDED. THE DURATION OF 
ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW 
OTWITHSTANDING  THE PREVIOUS SENTENCE (INCLUDING 
THE WARRANTIES OF MERCHANTABILITY AND FITNESS) 
SHALL IN NO EVENT EXCEED ONE YEAR. IN NO EVENT SHALL 
AQUASTEAM BE LIABLE FOR SPECIAL, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR 
USE OF ANY AQUASTEAM    PRODUCT; OR FOR ANY DELAY IN 
THE PERFORMANCE OF ITS OBLIGATIONS UNDER THISWAR-
RANTY DUE TO CAUSES BEYOND ITS CONTROL. SOME STATES 
DO NOT ALLOW LIMITATIONS ON HOW LONG ANIMPLIED 
WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION 
OR LIMITATION OF CONSEQUENTIAL DAMAGES; SO THE 
ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO 
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. 
YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO 
STATE.

Summary of Contents for Aquasteam ABSC02782





















Reviews: