www.aquavu.com
User Manual
Calibrate - To reset the OSD, select calibrate. Use the right arrow key to highlight the word START in red.
Then while the camera is level, rotate the camera counter-clockwise 5 times slowly. Use the left arrow key
to highlight the word END in red. For best results perform this outside. Metal in buildings and other
electronic devices may impact the internal compass.
Units - Use the left/right arrow keys to change the units of measure.
IR Lighting - To turn on the IR lighting system, press the yellow light bulb button on the display screen. To
increase the IR light brightness use the + button. To decrease the IR brightness use the - button.
Zoom - Press the zoom button to zoom in the display. Press the zoom button again to return to the
original screen. To use the touch zoom feature, touch a quadrant of the screen to zoom into that area of
the screen. A magnify symbol will appear in the upper left hand corner of the screen to indicate you are
in zoom mode. To return to the full view display touch the screen again.
HDMI Output- Use an HDMI cable to connect the Aqua-Vu camera system to any compatible display.
Other Features
CONTACT SUPPORT
Our Website: www.help.aquavu.com
Support: Click on support—contact us. Enter your name and information and we will get back to you
within 2 business days.
Phone: Give us a call at 866-755-6303. Normal business hours are 8am to 4pm M-F Central
Physical Address:
• Stop by during normal business hours 8am to 4pm M-F Central
• Our address is: 34076 County Rd 3 Crosslake, MN 56442
Thank you for your purchase!
Sincerely,
Team Aqua-VU
For helpful tips and FAQ’s, visit our Online Help Center
WWW.help.aquavu.com or scan the QR code with
the camera on your phone
