Aqua Systems SmartChoice II Wi-Fi, Quick Start Wi-Fi Setup

Page: 8 / 12

8.
Setup Summary
Place your system valve in “Wi-Fi Setting” mode.
On the valve press the Clock and down buttons at the same time
and hold for 15 seconds.
Using a computer or mobile device, “Wi-Fi network manager”,
select the Wi-Fi network that matches your Aqua Systems
equipment MAC id. See your equipment documents for exact
name. (ie. B0xxxxxxxxxx).
( If you do not see your Aqua Systems equipment MAC id, go back to
step #1 to place your equipment in “Wi-Fi Setting” mode again.)
If this is the first time that you are connecting, you will be asked for a
password of “12345678”
Using the same computer or mobile device, open the the web
browser and enter the address: 192.168.0.1
After the page loads, select the Wi-Fi network that best suits
your Aqua Systems equipment.
If the network you are selecting is password protected, type in
the Wi-Fi network password and enter.
To complete setup, visit https://wifi.ilovemywater.com and register
your Aqua Systems equipment.