INSPECTION
1.
Check if the pump is connected to a compatible source of electric power.
2.
Make sure the pump has contact with liquid, which is going to be transferred
(running the pump in a constant dry state is strictly forbidden).
3.
Make sure the ground wires are connected and the switch is turned OFF.
4.
If transferring a certain liquid may easily lead to static electricity occurrence, by all
means use a ground wire not only with the motor, but also with liquid
’
s container.
USAGE
1.
Open the valve
③
, insert device
’
s suction pipe into the liquid.
2.
Make sure the switch is turned off. Connect the device to the power source.
3.
Close the valve
③
and turn the switch ON. Then open the valve
③
gradually, to
adjust the delivery rate.
4.
After use
、
turn the switch OFF and unplug the device from the power source.
[Valve
③
location is marked on the next page.]
TECHNICAL SPECIFICATIONS
Model
KFC103-N
KFC104-N
Max delivery rate
80L/min
Max uplift (clear water)
16m
14m
Max temperature
60℃
Operated by
ELECTRIC MOTOR
Power source AC100V 4A (single phase)
Frequency
50/60Hz continuous rating
Power
160W
Cord
PVC, 4.7m
