8
LADDER MATS
1. Remove ladder mat from packaging
2. Place ladder mat onto the bottom of
the pool with the smooth side facing
down towards the liner
3. Place fully assembled ladder on top of
the ladder mat. Make sure the ladder
is centered on the ladder mat
4. Properly secure ladder to your pool
HOW TO INSTALL YOUR LADDER MAT
•
The use of a ladder mat is STRONGLY RECOMMENDED with any
pool ladder. Ladder mats prevent your pool liner from being damaged
by slight movements of your pool ladder.
USE MODEL
832116
Aqua Select®
9” x 24” MAT
SAFETY INFORMATION
MAINTENANCE
•
Step/ladder/bridges must be removed for winter, failure to do so can cause the step to
crack.
•
When removing step/ladder/bridges for winter, it is recommended that you spray down
step with hose water to rinse off any chemical residual prior to storing.
•
When storing step/ladder/bridges for winter, they should be protected from the elements
and stored either in a shed or garage, or covered with a tarp.
WARNING
Exceeding the recommended weight limit may cause the
step to fail and may result in injury.
•
When lifting heavy or awkward loads, it is suggested that two people lift to avoid injury.
•
DO NOT use the pool entry system for any purpose other than that for which it is intended.
•
Maximum weight on steps should NOT exceed 350 lbs.
LADDER MATS ARE SOLD SEPARATELY
FROM YOUR POOL LADDER
