Aqua One ReefSys 434 Manual Download

Page: 15 / 16

Inspiring Excellence in Fish Care!

ILTER

OCK

HAMBER

VERFLOWING

Filter socks or the sock silencers may be

clogged.

Clean the filter socks and sock silencers.

The socks may be due to be replaced.

If the flow rate is very high, it may be too high to

allow the water to pass through the silencers fast

enough.

Remove the silencers or reduce the flow rate.

RICKLING

OUND IN THE

UMP

Check the relative heights of the

baffles. If there is a large drop, the

water falling can be noisy.

Adjust the heights of the baffles.

Flow rate in the sump may be too

high to allow a silent flow. While

the system will work correctly,

the solution may be to reduce the

water flow through the sump.

Check the grille on the movable

baffle for blockages. If only part of

the grille allows water through, it

can become noisy.

Clean the grille if required.

ANK MAY BE

EAKING

If the water level has dropped,

there may be a leak in the tank

body itself. To find a leak, it may

be necessary to remove the tank,

dry it and place it on newspaper to

find the leak.

Turn off all pumps and mark the

water level with a marker. Leave

the tank for at least a few hours

and see if the water level has

dropped.

Check all plumbing fittings and all

equipment.

Watch for any splashing of water.

Clean any salt buildup from all surfaces.

Summary of Contents for ReefSys 434

















Search results

Summary of Contents for ReefSys 434

Reviews:

Related manuals for ReefSys 434

Brands by name

Popular brands

Aqua One ReefSys 434, Manual

Search results

Summary of Contents for ReefSys 434

Reviews:

Related manuals for ReefSys 434

Brands by name

Popular brands